2 Pack Washing Machine Water Hammer Arrestor, 3/4 Inch MHT x 3/4 Inch Swivel FHT, Stainless Steel Angle Water Hammer Arrestor to eliminate the water hammering Banging from washer
【Lead Free Brass】:Forged from solid C46500 brass that delivers high corrosion and abrasion resistance performance.They are certified with ASSE1010,NSF/ANSI 61,cUPC.
【Extra-Long Service Life】:This angle water hammer arrestor connects 3/4" GHT Male and 3/4" GHT Female pipe or fitting. Its MAX working pressure and temperature can be rated up to 250 PSI and 180°F.
【FUNCTIONALITY】: Water hammer arrestors shall be specifically sized and have sufficient volume of air to dissipate the calculated kinetic energy generated by closing residential washing machine valves. Arrestors shall be installed on both hot and cold supply inlets of washing machine valves. Arrestors shall be approved for installation with no access panel required.
【EASY INSTALLATION】This angle water hammer arrestor can be installed horizontally, vertically in any position in between,are expertly designed to absorb Unstable Water Shocks and Noise, safeguarding the plumbing pipeline.
【HOW TO CONNECTION】: It's easy to install, you need to turn off the hot & cold water outlets to your washer, unscrew the hoses (they will still have some water left in them, so have a towel handy), screw the hoses into the arrestors first, and then finally screw the arrestors directly in to the back of your washing machine. They have a long stem so they can clear the back panel of the washing machine easily if the inlets are recessed.
【What will you get 】: 2 × 3/4" GHT Male x 3/4" Swivel FHT Angle Water Hammer Arrestor , 1 × Paper Box
PATIKIL M8 Male Thread 4.2mm ID Brass Compression Fittings, 3 Pack Brass Compression Nut
SAR 36
Brennan 0304-C-06 Steel JIC Flared Tube Fitting, Cap Nut, 3/8" Tube OD
SAR 55
-4%
MroMax 304 Stainless Steel KF16 Flange to 10mm Rubber Hose Barb Adapter for Vacuum,Silver Tone 1Pc
SAR 65
Vulcan Hart 00-959662-00001 Maxitrol Gas Valve, 24V, Natural/Propane
SAR 977
