Brazed Tools
Crimping Tool Ethernet Network LAN Cable Crimper Cutter Stripper Plier 4P/6P/8P for Modular Connector
Instructions:
1.Squeeze handles and open the lock
2.Cut the modular cable to the desired length, make sure that the end are cut squarely, not diagonally
3.Insert cable between stripper blades, Squeeze handles, cable must be kept perpendicular and then pull from the tool.
4.Remove the outer jacket, insert the stripped cable into the , make sure the left wire at one end matches the right wire at the other end.
5.Place modular with cable into the tool's holder, Make sure the stripped wire between the tab and good contact. Squeeze handles until it stops
==========
Battery Included : No
High-concerned chemical : None