Specification:
Condition: 100% Brand New
Item Type: Ground Resistance Clamp Meter
Material: ABS+Iron
Function Ground Resistance Test, Loop Resistance Test
Power Supply 4 x 1.5V AA Dry Battery (Battery Not Included)
Resistance Range 0.01-1200Ω
Current Range 0.00mA-20A
Resistance Resolution 0.001Ω
Current Resolution 0.05mA
Data Storage 99 Groups
Alarm Threshold Setting Range Resistance: 1-199Ω, Current: 1-499mA
Audible Alarm Beep-beep-beep alarm sound, the alarm symbols flashes, press the AL button to turn on, off, and set
Interference Signal Recognition Function Beep-beep-beep prompt tones, NOISE symbols flashes
Working Temperature and Humidity -20℃-55℃; 20%RH-90%RH
LCD Display 4-digit LCD digital display, Size: Approx. 47x28.5mm / 1.9x1.1in
Jaw Size Approx. 65x32mm / 2.6x1.3in
Clamp Meter Size Approx. 285x85x56mm / 11.2x3.3x2.2in
Protection Level Double Insulation
Structural Features Clamp CT
Shift Automatic Gear Shift
External Magnetic Field 40A/M
External Electric Field ＜1V/M
Single Measurement Time 0.5 Seconds
Resistance Measurement Frequency ＞1KHz
Frequency of Measured Current 50/60Hz Automatic
Low Battery Voltage Indication Function When the battery voltage is lower than 5.3V, the battery voltage low sign is displayed
Stored Data Full Indication 99 sets of stored data are full, and the "MEM" sign flashes
Over-Range Indication Over-range indication "OLΩ", "L0.01" or "OL A"
Automatic Shut-Down The meter will automatically shut down after about 5 and a half minutes after starting up
Power Consumption Startup, working current is less than 50mA, continuous working for about 30 hours

Package List:
1 x Clamp Meter (Battery Not Included)
1 x Testing ​​
1 x Aluminum
1 x Manual

Notice:
1. Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not