The carbide triangle TCGT Turning Inserts are for holders STAC, STEC, STNC, STUC, etc. The inserts are for cutting aluminum.
The positive-rake feature enables the inserts to have an edge that is less than 90° to sit flat in the insert holder for improved cutting clearance and a better finish than negative-rake ones. The inserts have cutting edges on 1 side.
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge. When you buy the replacement inserts, be noted that the larger nose angles and larger tip radii enable a stronger cutting edge, but they result in increased vibration and a rougher finish.
Accusize Industrial Tools Height Gauge Adaptor with Clamps, 0002-0881
SAR 111
Accusize Industrial Tools 3/8" x 3/8'' Cut-Off Holder, Parting Tool, Mgehr06-2 of 2387-2003 with 10 Carbide Inserts for Cutting Steel, 2387-0003ins
SAR 345
Accusize Industrial Tools Hss Annular Cutter, 1-1/2'' Diameter by 1'' Depth with 3/4'' Weldon Shank, Ansi Standard, 2080-2029
SAR 205
Accusize Industrial Tools 4-1/2'' / M5-M12 Self-Reversing Tapping Head, 1/8'' Npt, Jt6 Jacobs Taper, 2600-4012
SAR 2,299
