The gold plated pogopins are designed for high-frequency testing and precision connection of electronic equipment. Spring Pogopin connectors are suitable for circuit board signal testing, battery connection, and modular interface mobile communications, automotive electronics, aerospace, etc.
The total length of the spring-loaded probe is 0.18 inches/4.5mm, the head length is 0.059 inches/1.5mm, the outer diameter of the needle tip is 0.03 inches/0.9mm, and the outer diameter of the needle barrel is 0.06 inches/1.5mm. The package contains 40 pcs test probe pogopin.
The thimble features a brass core and gold plating, combining excellent conductivity with wear and corrosion resistance. The plating effectively resists oxidation, ensuring a low-resistance connection over long-term use and extending the life of the probe.
The flat bottom of the spring contact probe makes soldering easy, and their internal spring design can withstand tens of thousands of cycles, so these pins provide reliable performance.
Pogopins are designed to compress straight along their vertical axis. Avoid any lateral forces, bending, or prying. The mating surface must be parallel to the pogopin tip. Misalignment can result in uneven contact, excessive wear, and potential shorting to adjacent components.
MECCANIXITY 2pcs Banana Plug Test Lead Male to Male Multimeter Cable 3.3ft Banana Tip Plugs 4mm for Multimeter Thermometer Speaker Cable
SAR 42
MECCANIXITY Crocodile Clamps Test Wire, USB Male to Alligator Clips 60cm for Charge Testing Circuit Adapter Black Red Pack of 2
SAR 33
MECCANIXITY Crocodile Clamps Test Wire, USB Female to Alligator Clips 60cm for Charge Testing Circuit Adapter Black Red
SAR 33
MECCANIXITY Spring Test Probe Pin 20pcs 1.7mm Tip 33.35mm for PCB Board Testing Contact
SAR 38
