Compatibility: Imperial-sized solid shaft through-hole housing pots are compatible with most USA electric guitars and basses like Gibson Les Paul LP/SG Fender Strat/Tele, JB, PB, PRS
Specifications: Imperial 6.35mm (1/4 inch) solid shaft for American-made guitar solid knobs, DO NOT fit for any 6mm knobs. Imperial shaft thread diameter: 9.35 mm (3/8 inch); Shaft length: 19 mm/0.748 inch; Threaded portion height: 10 mm/0.394 inch; Full base diameter: 24.1 mm/0.949 inch. Material: Brass shaft and thread
Resistance: 250K ohm with standard ±20% resistance tolerance; In general, 250K-ohm potentiometers are used with single-coil pickups. While any resistance value can be used, a 250K pot yields a slightly warmer tone compared to a 500K one. This is because the 250K pot bleeds off (or attenuates) some high frequencies to ground, contributing to that warmer character
Linear Taper: Linear Taper (B) increases or decreases in a linear fashion. Mostly, Linear Taper (B) are used for Volume controls. In practice, you can use an Audio Taper for volume or a Linear Taper for tone—ultimately, the choice comes down to personal preference
Size Verification Needed: Please carefully check dimensions before ordering. Compare with the size chart in our product images to avoid fitment issues and ensure easy installation. Package includes 1 x B250K guitar pot, 1 x nut, 1 x flat washer and 1 x internal tooth lock washer
Description
Compatibility: Imperial-sized solid shaft through-hole housing pots are compatible with most USA electric guitars and basses like Gibson Les Paul LP/SG Fender Strat/Tele, JB, PB, PRS