1. Can be applied to iron, steel, copper, aluminum and other processing
2. Each bit is double ended and grinds at a standard 60 degree angle
3. and , accurate positioning, clear cutting
4. Fast cutting speed and good chip evacuation
5. For precise centering of metals

Technical dataification:
Characteristics:
Can be applied to iron, steel, copper, aluminum and other processing.
Each drill bit is double ended and grinds at a standard 60 degree angle.
and , accurate positioning, clear cutting .
Fast cutting speed and good chip removal.
For precise center drilling in metals.
When turning between the centers, the two end faces of the workpiece receive the corresponding centering hole.
Preparation tool to maintain exact drilling position.
Technical data:
Quantity: 6 pieces
Product specification: 1.0mm, 1.5mm, 2mm, 2.5mm, 3mm, 5mm
Technical data : as shown in the picture
Weight: 60g
No.Body DiameterDrill Tip Diameter
#14mm1mm
#2 4mm 1.5mm
#35mm2mm
#4 6mm 2.5mm
#58mm3mm
#612mm5mm
Use:
1. Center and spot drills are traditionally used to drill a tapered hole for a lathe center to provide a starting point for a standard twist drill. They are intended to prevent the twist drill from running.
2. Used for workpieces that require machining between centers or manufacturing centers in components.
Scope of delivery:
6 x Center Drill
A notice:
Due to manual measurement, there may be 1-3mm error. Please understand, thank you!