The Seco-Larm Enforcer Multi-Color LED Strobe Light can indicate multiple conditions in your security setup because it can change between 7 different colors (Red, Green, Blue, Cyan, Magenta, Yellow, and White). This LED strobe light has 3 trigger input wires, allowing it to be triggered by external devices or it can be set manually via DIP switches. It also features 5 vertical LED strips (25 LEDs total) to help increase its visibility from all directions and has an adjustable strobe speed of 60 – 260 times/min.
Can change between 7 different colors (Red, Green, Blue, Cyan, Magenta, Yellow, and White)
Operating life: more than 50,000 hours
5 vertical LED strips increase visibility
Reverse polarity protection
IP66 weather resistant
The Seco-Larm Enforcer Multi-Color LED Strobe Light comes in a high-impact, weather resistant (IP66) case with reverse polarity protection and an impact and heat resistant lens. Installation is simple with 2 to 5 wires, plus, it has an operation life of more than 50,000 hours, which is more than 160 times that of other strobe lights.
Multi-Color LED Strobe Light
Manual
Manufacturer Part #: SL-3301-BAQ
UPC: 676544020196
Vertical LED Strips: 5
Total Number of LEDs: 25
Possible Colors: Red, Green, Blue, Cyan, Magenta, Yellow, White
Operating Voltage: 9~24 VAC/VDC
Current draw @12VDC (max.):
Strobe: 350mA
Steady ON: 350mA

Adjustable strobe speed:
Maximum setting: 260 times/min
Minimum setting: 60 times/min

Operating Life: Over 50,000 hours (over 5.7 years)
Operating Temperature: -4°~144° F (-20°~65° C)
Electrical Protection: Reverse polarity protected
IP Rating: IP66
Base: High-impact resistant black ABS
Lens: High-impact heat-resistant acrylic
Dimensions: 3-15/16 x 3-1/8 inches (100 x 79 mm)