Description:
CB09 Graphtec Blade Holder with 15pcs 30 45 60 Degree Cutting Blades

Specification:
Material: hard alloy
Length of holder: 50mm
Length of blade: 19mm
Degree: 30 ° / 45 ° / 60 °

Features:
Tool consistency.
Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.
Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.

Usage:
1. Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the
small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,
it should be the holder problem.
3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the
blade holder.

Package Included:
1 X Blade holder
5 X 30° Cutter Blade
5 X 45° Cutter Blade
5 X 60° Cutter Blade