1 1/2" Suction x 1 1/4" Discharge Pump; 120 PSI, 5100 RPM; 120 GPM; 7 GPM Hydraulic Motor; Load Sensing Closed/Open Center System; FMC-150-HYD-206 Provides higher pressure and greater volume for applications with large tanks and longer spray booms. The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems. Recommended for: Pressure Compensating Closed Center Systems Load Sensing Closed Center Systems Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass Ace developed the first hydraulic motor driven pump at the request ofJohn Deere in 1969. Many of the original pumps are still operating todayafter more than 30 years of service. Centrifugal pump design provides good resistance to abrasive solutionsand extra flow for agitation. The advantages of the hydraulic motordriven pump are mounting versatility, customized performance, and ease of maintenance. All hydraulic driven pumps are equipped with a stainless steel shaft and wear ring for excellent corrosion resistance. MOUNTING VERSATILITY: The location of the pump is not tied to the PTO orengine drive shaft; the pump can be mounted in a variety of locations to suit application requirements.