We have enhanced truck parts inventory and added an aftermarket Freightliner (check the compatibility list below) hood damper/spring tilt assist/hood shock. It's a custom-designed hood shock absorber that provides a direct replacement for A17-20970-000 and more OEMs. It smooths the process of truck hood opening and closing during inspection. It acts like a suspension shock and absorbs the quick movement of the hood being dropped/closed, or slammed shut. Learn more about our hood lift support below:-
Custom Fit: This truck part is designed to provide uninterrupted functionality like the original equipment. It's an economical solution that replaces only specified OEMs and truck makes and models. Check the complete compatibility list below:-
Compatible with Other Brands & Their Part Numbers:
Replaces Automann: A99462
Replaces Freightliner: A17-16391-000, A17-16391-002, A17-20970-000, A1716391002, FRTA1720970000

Compatible with Make, Model, & Year:
Fits Freightliner Cascadia P3: 2008-2017

Functionality: This hood lift support is a safety product that restricts sudden hood stoppage, making it easier for the driver or mechanic to open with minimal effort. Moreover, it provides stability in windy conditions.
Replacement Guide: Increase the life of your truck and its parts by keeping a keen eye. Your hood shock needs replacement if it shows below signs:-
Visible Fraying or rust on the cable.
Loose, sloppy, or stretched movement—no tension when pulling the handle.
Snapped, loose, or weakened spring, affecting the tension.
Eyelets/ends are bent, cracked, or no longer sit securely.

Installation Guide: Installation depends on the understanding and position of the product. This shocks & struts replacement is designed to mount on either side of the hood (typically left and right). It is connected between the hood structure and the chassis/frame. Now, check the safety and installation steps below:-
Safety Steps
Wear safety gloves and eye protection. Do not use excessive force and ensure the hood is supported properly.
Park the vehicle on a level surface.
Turn off the engine and engage the parking brake.
Disconnect the battery to restrict electrical hazards.
Support the hood securely when working on these shocks.

Installation
Locate the old hood shock and unscrew the bolts (hardware not included).
Install the new struts by attaching the lower and upper ends to their respective mounts (you might need a bracket as well, which is not included).
Check that it extends and compresses properly before removing any support.