"Stable Signal Transmission", High-precision Ceramic ferrule, which is easy to weld, ensures small optical loss and stable transmission. which is low insertion loss (≤0.3db) and low return loss ( ≥ 50db), high interchangeability (≤0.2db) and high repeatability (≤0.2db)Low insertion loss, low back reflection and high precision alignment.
"Useful Fiber Tool", - When you're not sure the cause of the network issues.This fiber optic loopback provides an effective way to test the transmission capability and receiver sensitivity of the optical fiber cabling, SFP Modules, device port or the entire network devices.
"Built For Repeated Use", - Loop back tester is built with stronger jacket material to withstand the repetitive demands of fiber testing on the job site, easily unclips & pulls away without damaging the cable.Fiber Cables meet industry testing standards.Specs are 9/125um, LSZH.
"Easy To Use", Plug-and-play, don't require extra setup. Without housing to avoid small bend radius inside the housing to cause the higher loss.supports -20~70℃ operating temperature.
"Operating Principle", Pairwise connected TX transmitting face transmit the signal back to the RX receiver face to test and evaluate the elements or interfaces of the optical fiber network.
2-Port PCI Serial Port Expansion Card,DB9 Serial Port Card Support (Win XP7-10/Vista Linux), PCI RS232 Card
SAR 202
MPO-MPO 25m OM3 Fiber Patch Cable,82.5ft 12-Core Multimode Fiber Optic,LSZH Jacket Optical Cable,40G/40GBASE-SR4, MTP Compatible for QSFP Transceivers,Data Center
SAR 152
PCIe 4.0 x4 to Dual M.2 Adapter Card, Dual Slot NVMe/SATA SSD Expansion Card, Support 2X M.2 NGFF SSDs at Full Speed,PCIe Expansion Card for PCI-EX4X8X16，with Fan to Dissipate Heat
SAR 113
LC/UPC to SC/APC Fiber Optic Cable, Armored Fiber Optic Internet Cable,Single Mode Simplex Optical Cord,Ethernet Fiber Optic Jmper,9/125μm OS1/OS2 Compatible,LSZH Blue 30m/96ft
SAR 49
