Are you struggling with low drying efficiency and persistent water stains on your laboratory glassware? Discover our high-performance laboratory glassware dryer, designed to quickly, evenly, and efficiently dry all types of laboratory containers. With this innovative solution, you can significantly reduce drying time and ensure your glassware is spotless and ready for use after every wash. **Product Features:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** Just 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions:** Outer Diameter × Height (excluding duct): 400×250mm **Packaging Includes:** - 1 × Glassware Dryer - 30 × Ducts **Instructions for Use:** 1. **Install Duct:** Choose the appropriate duct based on the size of your glassware and insert it into the corresponding air outlet. 2. **Set Temperature:** Adjust the temperature control knob to your desired setting and connect the power supply. 3. **Cold Air Mode:** Activate the hot air switch; the red light indicates hot air is being supplied, maintaining a constant temperature automatically. 4. **End of Drying:** Once drying is complete, turn off the hot air switch and let the cold air run briefly before removing your containers. Finally, switch off the power. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Use cold air to cool down and protect the motor from residual heat. **Additional Information:** - Please allow slight variations in size due to manual measurement. - Colors may vary slightly due to differences in lighting and screen settings. **Customer Support:** If you have any questions, feel free to reach out. Our dedicated support team is available to assist you within 24 hours. Elevate your laboratory efficiency with our reliable glassware dryer and enjoy a seamless experience every time you wash ...