Are you struggling with inefficient drying and unsightly water stains on your laboratory glassware? Discover our high-performance laboratory glassware dryer, designed to quickly and evenly dry all types of lab containers, significantly reducing your preparation time while ensuring they remain clean and as good as new after every use. **Product Features:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** Just 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions (Outer Diameter × Height, excluding duct):** 400×250mm **What's in the Box:** - 1 × Glassware Dryer - 30 × Ducts **Usage Instructions:** 1. **Install Duct:** Choose the appropriate duct based on the size of your glassware and insert it into the corresponding air outlet. 2. **Set Temperature:** Adjust the temperature control knob to your desired setting and connect the power supply. 3. **Cold Air Mode:** Activate the hot air switch; the red light will indicate that hot air is being supplied while the unit maintains a consistent temperature. 4. **End of Drying:** Once drying is complete, turn off the hot air switch, allow the cold air to run for a moment before removing the containers, and then switch off the power. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Use the cold air function to cool down and prevent motor damage from residual heat. **Please Note:** 1. Sizes may vary slightly due to manual measurement. 2. Product colors may differ slightly from actual images due to lighting variations. **Customer Support:** If you have any questions or concerns, please reach out to us. We are committed to responding within 24 hours. Enjoy your shopping experience!