Are you facing challenges with drying laboratory glassware efficiently and effectively? Discover our high-performance laboratory glassware dryer, designed to quickly and evenly dry various laboratory containers. This innovative solution not only saves you valuable time but also ensures that your glassware remains clean and in pristine condition after every use. **Product Features:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** Just 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions:** 400mm (Outer Diameter) × 250mm (Height, excluding duct) **Packaging Includes:** - 1 × Glassware Dryer - 30 × Ducts **Instructions for Use:** 1. **Install Ducts:** Choose the suitable duct size for your glassware and attach it to the corresponding air outlet. 2. **Set Temperature:** Adjust the temperature control knob to your preferred setting and connect the power supply. 3. **Cold Air Mode:** Activate the hot air switch; the indicator light will illuminate when hot air is being supplied, maintaining a consistent temperature. 4. **End of Drying:** After drying, first turn off the hot air switch, let cold air run for a moment before removing the glassware, and then disconnect the power. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Use cold air to cool the unit and prevent motor damage from residual heat. **Please Note:** 1. Slight size variations may occur due to manual measurement. 2. Product color may slightly differ due to lighting and screen settings. **Customer Support:** If you have any questions or concerns, feel free to reach out to us. We strive to respond within 24 hours to ensure your satisfaction. Enjoy your shopping experience!