Are you struggling with low drying efficiency and stubborn water stains on your laboratory glassware? Our high-performance laboratory glassware dryer is here to transform your cleaning routine. This innovative dryer ensures that all types of laboratory containers are dried quickly, evenly, and efficiently, significantly reducing your preparation time while maintaining their pristine condition after every use. **Product Features:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions:** Outer Diameter × Height (excluding duct): 400×250mm **Packaging Includes:** - 1 × Glassware Dryer - 30 × Ducts **Usage Instructions:** 1. **Install Duct:** Choose the appropriate duct size for your glassware and connect it to the corresponding air outlet. 2. **Set Temperature:** Adjust the temperature control knob to your desired setting and plug in the power supply. 3. **Cold Air Mode:** Activate the hot air switch; the red light indicates that hot air is being supplied, and the unit will maintain a consistent temperature automatically. 4. **End of Drying:** Once drying is complete, turn off the hot air switch, keep the cold air running for a moment before removing the containers, and then switch off the power. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Allow cold air to cool down the unit to prevent motor damage from residual heat. **Please Note:** 1. Due to manual measurement, size deviations may occur. 2. The product color may vary slightly due to differences in lighting and screen settings. **Customer Support:** If you have any questions or concerns, please reach out to us. We are committed to responding within 24 hours. Enjoy your shopping experience!