Specification:
Item Type: Electronic Tension Calibrator
Weight: Approx.134g / 4.7oz
Material: ABS
Battery: 2pcs AAA 1.5V Batteries (Batteries Not Included)
Color: Black

How to Use:
Starting Up:
Press the ON/OFF button to start the machine. About 2 seconds later, the display will display 0 . At this time, the tension calibrator completes initialization and enters the measurement state.
Unit Conversion:
Press the UNIT key to cycle between KG, , and OZ (1kg=2.2lb=2catty=35oz).
Zero:
Press the TARE key to return to zero.

Package List:
1 x Tension Calibrator

1 x Manual

Note:
1. Please hold the lifting or add auxiliary tools to the lifting side weight. Do not hold the side weight of the shell, otherwise it will to excessive error in the weight measurement.
2. Violent collision and impact should be avoided as far as possible.
3. Hand held tension calibrator shell adopts ABS engineering plastic, please use soft cloth with water or detergent wipe, strictly understand the use of , solvents, caustic soda liquid lamp corrosive substances for .
4. If the sign of low power is displayed, please replace the battery in time. If the electronic weighing device is not used for time, the battery to avoid damage to the circuit due to battery leakage.

5. When used to determine the weight of the tension calibrator, because the tension of is changing in the determination process, it needs measured for many times to take its average value, the average value is the final pound of the tension calibrator.