Are you struggling with low drying efficiency and stubborn water stains on your laboratory glassware? Our high-performance laboratory glassware dryer is here to solve your problems! This efficient dryer quickly and evenly dries all types of laboratory containers, significantly saving you time and ensuring they are clean and like new after each use. **Product Features:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions (Outer Diameter × Height):** 400×250mm (excluding duct) **Packaging List:** - 1 × Glassware Dryer - 30 × Ducts **Instructions for Use:** 1. **Install Duct:** Choose the appropriate duct according to the size of your glassware and insert it into the corresponding air outlet. 2. **Set Temperature:** Turn the temperature control knob to your desired setting and connect the power supply. 3. **Cold Air Mode:** Activate the hot air switch; the red light will indicate that hot air is being supplied, with the unit maintaining a constant temperature. 4. **End of Drying:** Once drying is complete, first turn off the hot air switch. Let the cold air run for a moment before removing your containers to avoid damage. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Use cold air to help dissipate heat and protect the motor from residual heat damage. **Please Note:** - Slight variations in size may occur due to manual measurement. - The product color may differ slightly from the actual item due to lighting and screen differences. **After-Sales Service:** If you have any questions, please reach out to us. We are committed to responding within 24 hours. Enjoy your shopping experience!