Are you struggling with inefficient drying and stubborn water stains on laboratory glassware? Our high-performance laboratory glassware dryer is designed to provide a fast, even, and efficient drying solution for all types of laboratory containers. This innovative dryer significantly reduces your drying time, ensuring that your glassware is left spotless and looking like new after every use. **Product Details:** - **Heating Power:** 800W - **Operating Voltage:** 220V/110V - **Electrode Power:** 22-30W - **Weight:** 6kg - **Material:** Durable Stainless Steel - **Temperature Setting Range:** 40-120℃ - **Drying Time:** 8-10 minutes - **Number of Air Outlets:** 30 - **Dimensions:** Outer Diameter × Height (excluding duct): 400×250mm **What's Included:** - 1 x Glassware Dryer - 30 x Ducts **Usage Instructions:** 1. **Install Duct:** Choose the appropriate duct size for your glassware and connect it to the corresponding air outlet. 2. **Set Temperature:** Adjust the temperature control knob to your preferred setting and plug in the device. 3. **Activate Cold Air Mode:** Press the hot air switch; the red light indicates that hot air is being supplied while maintaining a constant temperature. 4. **End of Drying Process:** After drying, turn off the hot air switch, let the cold air run for a moment before removing the glassware, and then turn off the power. 5. **Important Note:** Avoid disconnecting the power immediately after drying. Use cold air to cool down the unit and protect the motor from heat damage. **Note:** 1. Please allow for slight size variations due to manual measurement. 2. Colors may vary slightly from the actual product due to lighting and screen differences. **After-Sales Service:** For any inquiries, please contact us, and we will respond within 24 hours. Enjoy a seamless shopping experience!