Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment, etc.
With low friction and high top speeds, deep groove ball bearings are cost-effective and require very little maintenance.
After quenching, the toughness of carbon steel bearings is better than that of chrome steel bearings. These cost-effective bearings are widely used in areas with low Mohs hardness requirements.
Single row pre-lubricated, normal accuracy.
وصف
Selection Guide:
Shield (specify suffix Z/ZZ) - high speed. Prevents dirt and debris.
Seal (Designation SuffixRS/2RS) - Made of steel sheet reinforced NBR (oil and liquid resistant). Lower speed limit than Shield bearing.
Specifications:
Seal Type: Double Seal
Material : High Carbon Steel
Heat Treatment: Quenching
Hardness : HRC50-55
Cage Material: Stamping Steel Inner
Dynamic Load rating (Cr): 2.1kN
Rated static load (Cor): 1.3kN
Accuracy class: P0 (ABEC-1)
Noise Level: Z1
Packing Quantity: 2/5 Pieces
=========High-concerned chemical : None
Material : Bearing Steel
Model Number : 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 ZZ 2Z -2RS
Certification : CE