These battery terminal connectors are designed to provide a secure connection between battery cables and terminals, preventing power loss and voltage drops. These copper lugs are safe and reliable to use with heat shrink tubing, perfect for marine, automotive, distribution boxes, golf carts, solar panels, boats, home applications, vehicles, motorcycles, DIY wiring and other outdoor applications.
This Copper Cable Lug is made of copper and is installed using crimp method. It has a wiring specification of 8 Awg, with a terminal hole diameter of 5/16 inches and a head inner diameter of 4.8mm/0.19 inch. The total size is 19x12x8.4mm/0.75x0.47x0.33 inch and comes with 10 wire lugs including 10 3:1 heat shrink tubes (5 black + 5 red). The 3:1 heat shrink tubing size is 12.7mmx45mm/0.5x1.77 inch
90-degree bent copper lugs are made of pure copper to resist high temperatures and corrosion, ensuring minimal resistance and maximum power transfer. The 90° design fits snugly on battery posts and bolts, and can be connected by crimping and welding, ensuring electrical components, batteries, and cables are safe. 3:1 adhesive heat shrink tubing seals the connection and has excellent insulation properties, protecting the connection from heat, dust, moisture, and corrosion.
1.Crimp Tightly: Use a crimping tool to compress the lug barrel securely onto the wire.2.Seal with Tubing: Slide the heat shrink tube over the connection and apply heat (e.g., heat gun) until fully sealed.
Ensure the lug's AWG rating matches your wire gauge for a safe, snug fit.
MECCANIXITY 50 Ohm BNC Male to BNC Male Coaxial Cable RG8 90cm/3ft 10mm Low Loss or Analyzer, Antenna, Oscilloscope, RF Radio, Spectrum
SAR 109
MECCANIXITY Terminal Block 500V 60A Dual Row 10 Positions Screw Electric Barrier Strip
SAR 66
MECCANIXITY Heat Shrink Tubing, 3:1 Ratio 3/4 Inch Diameter 50ft Adhesive Lined Dual Wall Heat Shrink Tube Waterproof Sealed Black
SAR 124
MECCANIXITY DIN Rail Mount Fuse Holder Three-Level Terminal Blocks Screw Type Grey DIKD1.5 Pack of 5
SAR 53
