High performance hybrid vinyl ester chemical plug, especially suitable for low temperature applications. It is approved and does not contain styrene. Allows you to fix elements of high loads in cracked and uncracked concrete or materials such as hollow brick. This is an anchor suitable for static or quasistatic loads. It can be used to install items such as shelving, awnings, railings or security barriers, among others. It is valid for studs, corrugated bars and post-installed trusses. It is approved according to the highest quality standards: it has the European approvals ETA 24/0867 (option 1), which guarantees its operation to face structural applications in cracked and non-cracked concrete and ETA 24/0868 for post-installed reinforcements. It also has LEED and A+ certifications for low emissions, fire resistance, for contact with drinking water (NSF) and C1&C2 seismic. Its styrene free formula improves safety in enclosed spaces and contributes to a healthier work environment. It is an easy to install chemical plug, suitable for indoor and outdoor use. Can be used in dry, wet and flooded drills. Before injecting the resin, it is important to clean the hole of dust or fragments of the drilling and empty it of water. The start of the product should be discarded, until it comes out of uniform gray. In materials such as concrete, you have to introduce the cannula to the bottom and apply the resin until it covers half or three quarters of the depth of the drill. After this, you have to introduce a stud -or corrugated bar- to the bottom with your hand, threading it lightly, and ensure that the gap is completely filled -it should be observed that the resin overflows. This chemical anchor can be used with a wide range of accessories from INDEX A PERFECT FIXING, such as application guns for cartridges, studs made of zinc plated steel and stainless steel or plastic and metal sieves.