The intelligent non-contact liquid level sensor (hereinafter referred to as the liquid level sensor) adopts advanced signal processing technology and high-speed signal processing chip, which breaks through the influence of container wall thickness and realizes a true non-contact type of liquid level height in a closed container Detection.
The liquid level sensor (probe) is installed on the upper and lower sides of the outer wall of the container to be measured (the high and low levels of the liquid level).
The non-metallic container does not need to be opened, and the installation is simple and does not affect production. It can detect the liquid level of various liquid toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers.
The liquid level sensor has no special requirements for the material of the liquid medium and the container, and can be widely used. XKC-Y26A-XXX series products are specially developed for non-metallic pipeline liquid level detection.
This series of liquid level sensors are divided into three signal output control methods: high and low level output interfaces, NPN output interfaces, and PNP output interfaces;
Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion
SAR 233
Taidacent Automatic Water Level Controller Automatic Water Pump Controller Either to Fill or Empty a Tank 2 Non Contact Pipeline Water Level Sensor 1 Meter Cable
SAR 261
Taidacent Non Contact Levels of Measurement Flow Sensor Water Level Sensor Level Transmitter Float Switch Water Level Switch PNP Output
SAR 97
Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output
SAR 84
