Features:
【5IN POLISHING GRINDING DISC】Replacement sander pads are suitable for 5-inch 4-hole sanders and can be used with 5-inch 8-hole sanding disc sandpaper. The distance from the center to the center of the cushion screw hole is about 1-1/4 inch. Designed to fit most 5-inch orbital sanders and grinders with 4 screws.
【DURABLE MATERIAL】The 5-inch sanding backing pad is made of PP and rubber. The hard plastic backing plate is not easily damaged, and the soft rubber can reduce the vibration of the sander and improve the sanding effect.
【HOOK AND LOOP】The hook surface is evenly arranged, has high density and good stickiness, preventing sandpaper from flying out during work. The hook-and-loop design allows for quick and efficient replacement of sandpaper.
【EASY TO INSTALL】Installation is easy by tightening with the existing screws on your sander. Please note that screws are not included. Replacing the sanding pad is a cost-effective option that extends the life of your sander.
【REPLACEMENT PART】You will receive 2 pieces of sander pads for your convenience. They are used to protect the sander from damaging the disc holder during work. 8-hole configuration helps remove dust from work surfaces.

Specifications:
Material: PP, rubber
Color: Black
Size: (Approx)(DIAxH) 127mmx10mm/4.84x0.39inch

Hook and loop side:
Hole diameter: (Approx)
outer:12mm/0.47inch,
inter: 4mm/0.15inch

Hard plastic side:
Center hole diameter: (Approx) 32mm/1.25inch
Screw hole linear distance: (Approx) 32mm/1.25inch
Screw hole diagonal distance: (Approx) 1.77inch/45mm

Application: Suitable for 5-inch 4-hole sanders, fit for 5-inch 8-hole sanding disc sandpaper

Package Included:
2pcs x Sander Pads

Notice:
1. Check if it is suitable for your sander based on these information, 5 inch diameter, 8 dust holes and 4 screw holes, especially the linear distance between screw holes center to center (1-1/4 inches), the diagonal distance is 1.77inch/45mm. Please pay attention to whether the size is suitable when purchasing.