Size: This hood latch for truck hood is available in a length of 8.4" and a width and height of 4.5" and 1.6" respectively.
Application: This hood latch bracket is helpful as it prevents the truck hood from opening unintentionally and keeps it tightly closed. It reduces vibrations and enhances safety.
Compatibility: Check the complete compatibility list below:
Fits Peterbilt 4731HUN

Safety Considerations
Always wear safety gloves and eye protection during removal and installation.
Make sure the hood is fully supported or propped open to prevent accidental closure.
Do not use damaged or makeshift tools that could slip or cause injury.
Keep fingers away from the latch spring mechanism during adjustment or testing.
After installation, check the latch alignment and hood fit before resuming normal vehicle use.
Installation Instructions
Park the truck on a flat surface, turn off the engine, and open the hood fully using hood supports.
Locate the latch on the hood's latch bracket; identify the pivot point and any retaining pins or bolts.
Remove the old latch by detaching the pivot fastener and any return spring using standard tools .
Clean the bracket area to ensure smooth rotation and secure attachment of the new latch catch.
Install the new latch catch, aligning it with the pivot holes. Attach any spring if applicable, and secure it with the pin or bolt. Test for smooth operation.
When to Replace Your Truck Hood's Latch Bracket
If the hood does not stay securely closed or opens while driving.
When the latch catch is bent, rusted, or shows excessive wear.
If the hood feels loose or misaligned during regular operation.
After a front-end collision or severe vibration impact.
When you notice unusual noise or resistance when engaging or releasing the latch.