Faster Planing & Smoother Ride:Trim tabs help lift the stern and bring the bow down for quicker planing, improved visibility, and steadier handling in chop, crosswind, and changing loads—especially when passengers/gear aren't evenly balanced
Fast-Response Electric Actuators (Instant Adjustments):Electromechanical actuators respond quickly to small “tap” inputs, letting you fine-tune attitude on the fly—great for correcting list (lean) and dialing in a comfortable running angle
Built for Marine Use (Stainless Planes + Sealed Connections):Stainless steel trim planes for corrosion resistance, plus Deutsch-style sealed connectors for a cleaner, more secure installation. (Use marine-grade sealant on all transom penetrations.)
Simple Double Rocker Switch (Bow-Based Control Feel):Includes a double rocker switch for straightforward control while underway—make quick, small adjustments to find your boat's sweet spot. Switch harness length: 6.6 ft for flexible helm placement
Complete Kit — What's in the Box (No Guesswork):Includes: (2) 9" x 12" trim planes, actuator set, (1) double rocker switch, connectors/wiring, hinge bases/brackets, cover plates, rubber pads, cable ties, screws/bolts/nuts, and manual. Cross-reference replacement: Part #15101-104 (verify size, voltage, and your connector style before ordering)
وصف
Get on plane faster. Ride smoother. Stay in control.
The XHHEZQ 9" x 12" Standard Mount Electric Trim Tab Kit helps optimize your boat's running attitude by redirecting water flow at the transom—lifting the stern and bringing the bow down for a steadier, more comfortable ride.
What trim tabs help with:
Faster planing & improved forward visibility
Correcting list (lean) from uneven passengers, fuel, or gear
More stable handling in chop, wind, and varying speed ranges
Fine-tuning running angle for efficient cruising (results vary by hull)
Fast-response electric control:
Electromechanical actuators respond quickly at the switch. Use short, momentary taps and learn what your hull likes—every boat reacts differently.
Simple helm control:
Includes a double rocker switch with a 6.6 ft harness for flexible mounting at the helm.
Install notes (important):
Installation requires drilling and sealing fasteners/cable pass-through. Confirm inside-hull clearance before drilling. Use marine-grade sealant on all penetrations. A properly sized fuse or circuit breaker is recommended per standard marine wiring practice (not included).
In the box:
(2) 9" x 12" trim planes, actuator set, (1) double rocker switch, connectors/wiring, brackets/bases, cover plates, rubber pads, cable ties, bolts/nuts/screws kit, manual.
Aftermarket product. Verify fitment before purchase.