compatible with:

1999-2009 for 250
1998-2016 for 300
1998-2015 for 400
2002-2004 for Quest 500
1999-2005 for Traxter 500
2008-2015 for Can-Am DS450
1981-1986 for ATC250R
1997-2004 for Foreman 400
1998-2004 for Foreman 450
2005-2016 for Foreman 500
2001-2017 for Foreman Rubicon 500
1988-2000 for FourTrax 300
1987-1989 for FourTrax Foreman 350
2000-2006 for Rancher 350
2004-2008 for Rancher 400
2007-2016 for Rancher 420
2002-2007 for Eiger 400
2008-2017 for King Quad 400
2005-2007 for King Quad 700
2008-2017 for King Quad 750
2002-2014 for Ozark 250
2006-2009 for Quadracer 450
1989-1990 for Quadsport 250
2002-2007 for Vinson 500

Item Including:
2PCS Wheel Adapters + 8 lug boltsParameters：
Thickness:1 inch
vehicle Bolt Pattern:4x110
Wheel Bolt Pattern:4x156
Center Bore:74mm
Thread Pitch:12x1.25
Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
Your lugs studs will need to be shortened by grinding them down
You can replace your studs will shorter studs
if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)Legal Disclaimer
Legal Disclaimer
It is ultimately the buyer's responsibility to have all bolts/nuts checked for tightness after the first 500 miles, and then again every 1,000 miles. Wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles.