Installation Guide:
1.Remove original fog light​​
Undo screws/clips/retainer springs securing the fog light, then disconnect its wiring harness connector.！Key Tip: Keep removed parts organized to prevent loss.
2. Install new assembly with sealed mounting
Position new fog light into factory location, secure with original fasteners, and perform critical waterproofing by confirming all joints are fully sealed.
3. Reconnect wiring & restore components
Plug wiring harness firmly into new assembly, reattach grille/trim pieces with secure clip engagement.
4. Validate functionality
Start vehicle to test fog light operation, verify beam alignment and ZERO condensation inside lens.