Search

Home / FUELHOOD / Replacement Parts
Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc in Saudi Arabia

Manifold Absolute Pressure MAP Sensor for Harley Davifor DSon FLHR Road King 2017-2020 No.32700065 1 Pc

SAR 65

Brand
FUELHOOD
Weight
23 g
1 +

Special Features

  • Fitment:for Harley Davifor DSon FLHR Road King 2017-2020, for Harley Davifor DSon FLHRXS Road King Special 2017-2020, for Harley Davifor DSon FLHT Electra Glide Standard 2019-2020, for Harley Davifor DSon FLHTCU Electra Glide Ultra Classic 2017-2019, for Harley Davifor DSon FLHTK Ultra Limited 2017-2020, for Harley Davifor DSon FLHTKL Ultra Limited Low 2017-2019, for Harley Davifor DSon FLHX Street Glide 2017-2020, for Harley Davifor DSon FLHXS Street Glide Special 2017-2020
  • OE Numbe:32700065
  • Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
  • Feature: Made of good quality material. It is stable and durable, use for a long time.
  • Installation:1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.6.Test: To drive and check loose/solder issues.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}