SeaSierra 27151 Skeg Repair Guard for Yamaha 150 175 200 300 350 HP Outboard Motor
Replace part number: 27151
Application:
Fits Yamaha Outboard:
2 Stroke
150 175HP 1984-Present
200HP HPDI & VMAX HPDI 2000-2012
4 Stroke
150 175HP 1984-Present
200HP 2.8L I-4 2012-Present
300HP 2007-2009
350HP 2007-Present
I/O Sterndrive Models 1989-1993
Installation Step:
STEP 1. Ensure proper fit before installing the Skeg Protector Guard. There must be at least two to three inches of upper skeg remaining to secure the new Skeg Protector Guard to. lf any portion of the skeg has been bent or distorted, fitment may be difficult without re-conforming to original shape.
STEP 2. Any spurs or jagged edges should be filed smooth, so the Skeg Protector Guard can easily slide over the existing skeg.
STEP 3. Place the guard on the skeg, use a leather, rubber or wooden mallet, gently tap on it to get it started until fully seated.
STEP 4. Using the two pre-drilled mounting holes in the Skeg Protector Guard as pilot holes, drill the skeg using a 1/4" drill bit, and install the stainless steel hardware using the hex key tool supplied with the product. The hardware includes a thread locker sealant to prevent loosening of the bolts once installed.