This suspension correction kit is engineered for 4Runner (2003–2023, 4th and 5th generations), FJ , and GX470 (2003–2009) vehicles equipped with lift kits up to 4 inches.It addresses changes in suspension geometry caused by vehicle lifting by repositioning the bar to a level orientation, restoring alignment closer to factory specifications.This helps minimize lateral axle movement during articulation and maintains consistent track width.The kit eliminates the need for an adjustable bar by correcting the mounting position, simplifying setup and reducing potential failure points.By raising the roll center, it enhances stability during cornering and off-road driving, resulting in more predictable handling and reduced body roll.The axle-side bracket is fabricated from 3/16-inch steel plate, matching the thickness of the mount for strength.The frame-side drop bracket is cut from 0.120-inch steel plate and available in 2, 3, and 4-inch drop options to suit various lift heights.Installation is straightforward—the lift bracket aligns smoothly with the existing axle mount, and the drop bracket attaches directly to the factory frame mount using the bolt hole for accurate placement.Two 3mm hardened steel spacers are included to maintain the inner diameter of the factory bushing mount, compatibility and a secure fit.Package includes: 1 x correction plate, 2 x screws.