Conditon: 100% Brand New
Item Type: Traction Control Tie Bar Kit
Material: Stainless Steel
Color: As Pictures Shown
Cross Bar Size: Approx. 90.5 x 19cm/35.6 x 7.5in
Tie Bar Size: Approx. 52 x 3.5cm/20.5 x 1.4in
Installation Steps:
1. Remove the old crossmember
2. Remove both front tow hooks.
3. Mount the Traction bar without the radius arms
4. Install radius arms. Bolt the front first where it goes on the bar
5. loosen up the nut on the heims and adjust length until the holes line up to the top of the front lower control arm(be sure to count the threads on the heims to make sure both side is equal length)
6. Tighten up all bolts and make sure to not forget the nut on the heims.
Fitment:
Fit for 1988-1991 only
Fit for CRX 1988-1991 only

Package List：
1 x Cross Bar2 x Tie Bar
1 x Accessory Pack

Note:
Professional installation is highly recommended.