Handlebar rubber damper / cushions for the Honda twins from the 70's and 80's. Sold as a set of 4. All 4 reproduction handlebar dampers are the same. If the handlebars feel loose and the handlebar mounts are tight, the rubber dampers are probably stiff and worn out. Play in the handlebars is never a good thing and the Honda twins can be pretty vibey. Dampen that vibration with some fresh rubber!
Height: 22mm
Diameter: 24.3 (at widest) tapers down to 18.2mm
Inner Diameter: 12.2mm
Note: The CB500T will require a few M12 washers since the bushings sit slightly lower in the triple tree. Using washers will prevent the threads from bottoming out while tightening the nut.
Note: Some models had a bottom bushing that is slightly different from the top. The bottom bushing is nearly the same as the top bushing so these new bushings can be used on both the top and bottom.
Replacement for Honda part numbers: 53133-237-680, 53133-303-000, 53133-385-000
CA175K - 1969-1970
CB175K - 1969-1973
CL175K Scrambler - 1968-1973
SL175K - 1970-1972
XL175 - 1973-1978
CB200 - 1974
CB200T - 1975-1976
CL200 Scrambler - 1974
CMX250C Rebel - 1985-1987, 1996-2009, 2012-2014
CMX250X2 - 2015-2016
CMX250X3 - 2015-2016
XL250 - 1972-1976
CB350G - 1973
CB350K - 1968-1973
CL350K Scrambler - 1968-1973
SL350K - 1968-1973
XL350 - 1974-1978
CB360G - 1974
CB360K - 1974
CB360T - 1975-1976
CL360K Scrambler - 1974-1975
CJ360T - 1976-1977
CM400A Hondamatic - 1979-1981
CM400C Custom - 1981
CM400T - 1979-1981
CM450A Hondamatic - 1982-1983
CM450C Custom - 1982
CB450K - 1965-1974
CL450K Scrambler - 1967-1974
CB450SC Nighthawk - 1982-1986
CB500T - 1975-1976
FT500 Ascot - 1982-1983
and probably more....