Made for the 14" Delta Band Saw, Include Models: 28-205, 28-206, 28-207, 28-209, 28-230, 28-240, 28-248, 28-248F, 28-348G, 28-380, 28-475X, 28-141, 28-200, 28-243, 28-276, 28-203, 28-348, 28-348F, 28-306, 28-303, 28-300, 28-299, 28-299A, 28-293, 28-290, 28-285, 28-278, 28-275, 28-270, 28-269, 28-263, 28-262, 28-255, 28-254, 28-248G, 28-245, 28-241, 28-231, 28-216, 28-283, 28-280.

These Urethane band saw tires are designed to fit any machine that requires a 1 inch by 0.095 inch by 14 inch bandsaw tire.

Replacement craftsman /Delta number part: 3AD92501,905145. Fit Models: Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0555 G0457 G0555P G0555X G0580 T21005 G1019 G1019Z, & Powermatic PWBS-14, PWBS-14CS.

How to Install Your Urethane Band Saw Tires

Make sure to unplug your band saw whilst changing any parts or servicing it.
Urethane band saw tires don't require adhesive, but they do need to be stretched on.
Remove the old tires, and clean the machine of any dirt, debris, or adhesive.
If you can't get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in both directions and add clamps as you go.
A dowel rod or smooth tool can be used to pry the tire on.
Once the tire is securely on the wheel, the stretch will need to be smoothed out.
With a dowel between the tire and the wheel, roll it around the entire wheel.
More detailed versions of instructions can be found by searching for “urethane bandsaw tire installation” online.
Tips：You can soak it in hot water to make it easier to install.