The SeaSierra skeg protector can repair a damaged or broken skeg on an outboard motor or stern drive. It also adds an extra layer of protection, effectively resisting impact from hidden debris and everyday wear and tear
Fit Mercruiser 1985-1990 Alpha 1 sterndrive
Replace skeg cover guard part number 27021, 35-SS605
The skeg repair kit include male & female stainless locking screws, 1/4-inch drill and hex key tools
The skeg protector guard is crafted from 316 stainless steel with a fine mirror-polished surface to ensure it fits perfectly on your skeg
وصف
SeaSierra 27021 Skeg Repair Guard for Mercruiser Alpha 1 One Gen 1 Stern Drive
Replace part number: 27021 35-SS605
Application:
Fits Mercuriser Stern Drive:
Alpha I 1985-1990
Installation Step:
STEP 1. Ensure proper fit before installing the Skeg Protector Guard. There must be at least two to three inches of upper skeg remaining to secure the new Skeg Protector Guard to. lf any portion of the skeg has been bent or distorted, fitment may be difficult without re-conforming to original shape.
STEP 2. Any spurs or jagged edges should be filed smooth, so the Skeg Protector Guard can easily slide over the existing skeg.
STEP 3. Place the guard on the skeg, use a leather, rubber or wooden mallet, gently tap on it to get it started until fully seated.
STEP 4. Using the two pre-drilled mounting holes in the Skeg Protector Guard as pilot holes, drill the skeg using a 1/4" drill bit, and install the stainless steel hardware using the hex key tool supplied with the product. The hardware includes a thread locker sealant to prevent loosening of the bolts once installed.