Specification:
Type: Electronic Ignition Kit
Fitment Type: Direct Replacement
Placement on Vehicle: Front
For engines with:
6-cylinder Nippondenso (points-based) Distributors:
for Toyota, Toyota Industrial, Nippondenso Distributors
(for 12-volt, negative ground electrical systems only)
Your distributor point must look exactly like the photo above, otherwise the 3ND6U1 ignition kit will not be suitable for your distributor.
Coil with 3.0 Ohms or more internal, primary resistance required.
Requires a 12-volt, negative ground electrical system.
External ballast resistance: If the charging system voltage, measured at the+terminal of the coil, exceeds 13.9 volts at any RPM level, excessive voltage can damage the ignition module and other electronic components.
For original equipment Toyota/Nippondenso (with single, right-pivoting points, not dual-points) distributors only.
For: 6-cylinder Nippondenso distributor - 3ND6U1
Fitment:
for Toyota
for Toyota Crown with 6-cyl distributor with points and condenser - 3ND6U1
1974-77 6-cyl Landcruiser with Nippondenso Distributor with right-pivoting points, secured by two screws to breaker plate - 3ND6U1
for Toyota Industrial
All 6-cyl 2FG-50, 2FG-60, 3FG-32, 3FG-35, 3FG-40, 3FG-50, 3FG-60 - 3ND6U1
Nippondenso 6-Cylinder Distributors:
for Toyota 6-cylinder Industrial Applications:
2FG-50 - 3ND6U1
2FG-60 - 3ND6U1
3FG-32 - 3ND6U1
3FG-35 - 3ND6U1
3FG-40 - 3ND6U1
3FG-50 - 3ND6U1
3FG-60 - 3ND6U1
Nippondenso 6-cylinder Distributors (Toyota):
029100-1231 - 3ND6U1
for Toyota Land Cruiser (F engine) 029100-3161 - 3ND6U1
029100-3184 - 3ND6U1
19100-60061 - 3ND6U1
19100-61010 - 3ND6U1
for 1970-76 Toyota Land Cruiser FJ40, FJ55 (F engine) 19100-61010 - 3ND6U1
for 1974 (non-California models, with points) Toyota Land Cruiser FJ40, FJ55 (F engine) for 19100-61020 - 3ND6U1
2F Distributors
Note 1: For 6-cylinder Nippondenso (points-based) Distributors
Note 2: For 12-volt, negative ground electrical systems only

Package Included:
1Set Electronic Ignition Kit