About This Wall Mount This wall mount is designed for displaying LEGO SW Logo set 75407. The mount attaches to drywall using included hardware and allows the set to be displayed vertically on the wall. Product Features Compatible with LEGO SW Logo set 75407 3D printed from PETG material Wall mounting hardware included (screws and drywall anchors) Set can be removed from mount without removing mount from wall No modifications to LEGO set required Available in Black or Yellow Installation Information The mount requires installation into drywall using included anchors and screws. Basic tools needed: drill, screwdriver, pencil, and level (tools not included). Installation steps: 1. Position mount on wall and mark drill locations 2. Drill pilot holes 3. Insert drywall anchors 4. Attach mount with screws 5. Slide LEGO set onto mounted bracket Specifications Dimensions: 10.1" L x 1.6" D x 4.6" H Weight: 4.3 oz Material: PETG plastic Color options: Black, Yellow Mounting surface: Drywall (other surfaces may require different hardware) Package contents: 1 wall mount, 2 screws, 2 drywall anchors, instructions Compatibility This mount is designed for set 75407 only. Verify your set number before ordering. The mount will not fit other LEGO sets. What's Included 1 wall mount (Black or Yellow) 2 mounting screws 2 drywall anchors Installation instructions What's NOT Included LEGO set 75407 (sold separately) Installation tools Alternative mounting hardware for non-drywall surfaces Important Information Proper installation is required for safe use. Follow all installation instructions. Installer is responsible for ensuring secure mounting appropriate for their wall type. Different wall materials may require different mounting hardware (not included). LEGO set must be purchased separately. This listing is for the display mount only. Disclaimer: LEGO is a trademark of the LEGO Group of Companies which does not sponsor, authorize, or endorse this product.