The softest polyurethane pour-in available from Inchimica. This rapid curing (45 seconds) 2 part liquid urethane pad absorbs shock and impact. Designed specifically for horse hoof care, it offers support and protection for flat-footed or thin-soled horses. Ultra Soft Pad guarantees protection and comfort to the hoof. It has a shock- absorbing effect and protects the hoof from debris, stones, moisture and contamination.
Pour-in pads, made of urethane adhesives, bond to the sole of a hoof and produce a soft, resilient supportive pad material. Designed to increase the weight-bearing surface area, these materials alleviate pressure off the hoof wall and allow the sole to take on some of the horse's weight.
Pad Comfort can be applied under a plastic or leather pad or in association with Sole Protect. Leaves the frog in perfect condition.
Hardness rated at Shore 20A = Ultra Soft. Provides ultra-soft cushioning for extra sensitive horses.
Ultra Soft Pad guarantees protection and comfort to the hoof. It has a shock-absorbing effect and protects the hoof from debris, stones, moisture and contamination.
This pour-in pad can be applied under a plastic or leather pad or in association with Sole Protect. Final hardness of this packing material is Shore 20A, and is recommended to hooves which are sensitive to pressure. It has very good flexibility.
Pour-in pads have very good compatibility to one another and offer a wide range of applications for fixing foot diseases.
If the external temperature is lower, the cartridge can be placed with original plastic packaging in hot water for some time. Vice versa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water. The chemical reaction between the two components can reach the exothermic temperature of 70°C. It is recommended to use disposable gloves.
Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recommendations: cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.
Hardness: Shore A20
Working time: 45 seconds
Curing time: 3 minutes
Part No: E2.1006.200
Available in 200 ml cartridge.
Storage temperature: 68-85 F
Shelf life: 12 months after manufacturing