1. [FAST AND EFFICIENT TRANSFER] Transfer data at up to 3Gb/s with this adapter card, supporting modes for versatile storage options.
2. [COMPATIBILITY AND CAPACITY] with PCI-Express 1.0 standard and support hard drives with a capacity of 137 GB or more, ensuring compatibility with various devices.
3. [EASY TO INSTALL] Simply insert the adapter into the PCI-Express slot, read the drive disk, and connect the hard drive for immediate use.
4. [FLEXIBLE STORAGE OPTIONS] Supports 0/1/0+1 modes, as well as JBOD, providing multiple storage methods for your convenience.
5. [VERSATILE INTERFACE] Features 1 external ESATA interface and 1 internal interface, allowing you to connect different types of drives simultaneously.

Spec:
Item Type: Adapter Card
Material: PCB
Color: Black board
Chip: For JMB363
Transfer Type: PCIe to 2 internal + IDE + 2 external ESATA (external ESATA and internal can only use 2 at the same time, select by jumper, the default is 2 internal interfaces)
Transfer Rate: Up to 3Gb/s
Supports hard drives with a capacity of 137 GB or more (48-bit LBA mode)
1 IDE interface supports up to 2 IDE devices
How to Use:
1. Open the computer case and remove the rear block
2. Insert the adapter into the corresponding PCI-Expres slot
3. After installing the chassis, turn on the device, read the drive disk, install the drive, and then connect to the hard drive for use

PackageList:
1 x Adapter Card
1 x Driver CD

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.