ESP32-CAM Product Introduction
This module serves as the program download board for the ESP32-CAM WIFI camera module, eliminating the hassle of wiring. Simply plug the ESP32-CAM into the board and connect the USB Type-C cable. The bottom board leads out all the pins of the ESP32-CAM module, making it convenient to connect other external devices. It can also be used as a regular USB to 3.3V TTL serial port tool without inserting ESP32 CAM.
Product dimensions
V2.0:32.637. 1mm

Instructions for use
Before use, install the CH340 serial port driver program on the computer. After installing the driver, plug it into the USB and recognize the COM port in the device management.
Due to the multiple versions of the ESP32-CAM development board module and the integrated reset button on board, the version without/R does not have a reset pin, while the version with/R has a reset pin.
Download steps for V2.0: Without the/R version, the download steps are the same as those for V1.0. With/R version, it supports automatic download and insertion Simply click on download and burn on the development board without pressing any buttons.
Note: Without the/R version, reset can only be done using the reset button on the ESP32-CAM board. With the/R version, the reset button on the SP32-CAM board or the reset button on the test board can be used.