Introducing our 3D-Printed Battery Enclosure with Low Voltage Shutoff – the perfect solution for ensuring your batteries stay protected while powering your Starlink Mini. Designed for the DIY enthusiast, this enclosure allows you to connect two batteries, giving you the flexibility to swap one out while keeping your Starlink Mini continuously powered.

Please note: This works with the pipe mount you received with your Starlink mini Kit; the pipe mount or the mini antenna is not included in this purchase.
Key Features:
Low Voltage Shutoff: Protects your batteries from overdraw, extending their lifespan.
Hot-swappable Dual Battery Support: Connect two batteries and easily swap one out without interrupting power to your Starlink Mini.
Safety First: Built-in Protection: Diodes and fuses are integrated into the positive wire of each battery to prevent short circuits and ensure safe power distribution, even when batteries have uneven charge levels.
We have received a lot of questions regarding runtime:
It's tricky to give an exact runtime for a Starlink Mini antenna on batteries because several factors influence power consumption. Here's a breakdown of what we know and how to estimate:
Starlink Mini Power Consumption:
Rated at: 20-60 watts (60w, highest when it's melting snow buildup)
Average: 20-25 watts
Idle: 15 watts
Estimating Runtime:
Worst-case scenario (40W consumption):
2x 3Ah battery: 54Wh / 40W = 2.7 hours
2x 6Ah battery: 108Wh / 40W = 5.2 hours
Best-case scenario (15W consumption):
2x 3Ah battery: 54Wh / 15W = 7.2 hours
2x 6Ah battery: 108Wh / 15W = 14.4 hours

The Starlink Mini, Pipe Mount and Batteries are not included, they are shown in the photos as an example.