مميزات خاصة

【Compatibility】[!!!LCD with Frame,Not AMOLED Oirginal,NO Fingerprint Sensor!!!] Only LCD Display for Samsung Galaxy S23 FE 5G S711 S711U S711W LCD Digitizer Touch Screen Assembly Replacement,Not Fit for Samsung S23/S23 Ultra/S23 Plus. Confirm phone model before purchasing.The wrong model could damage your phone
【About Fingerprint Function】The most important point is that the TFT for Samsung Galaxy S23 FE 5G screen is not equipped with a fingerprint sensor, so there is no fingerprint function! If the fingerprint function is important to you, we recommend purchasing the original product.Note that screen doesn't include power/volume buttons etc., need to remove from old screen and reinstall.
【Application】Used to replace defective LCD display touch screen digitizer assembly for Samsung Galaxy S23 FE 5G S711 like incorrect screen response, display issues, pixel distortion, cracked screen, wrong colors, old or frozen LCD
【Quality Assurance】All for Samsung Galaxy S23 FE 5G S711 S711U S711W Screen Replacement products are strictly QC tested before shipment, 100% intact with no scratches, dead zones, dot pixels or lines. High color saturation, resolution, wide color gamut and smooth hand feel,DIY
【After-sale Service】We provide 3 months warranty. All for Samsung Galaxy S23 FE 5G S711 S711U S711W lcd screen replacement Products were tested well before shipping. If have any problem about your order,contact our customer service team,we will kindly provide help within 24 hours. For quality problem,as long as our screen without any man-made or physical damage,we can ship a new when it can not work normally

وصف

PLEASE NOTE:
TFT Screen Replacement for Samsung Galaxy S23 FE 5G S711 S711U S711W LCD Display Touch Screen Digitizer Assembly with Tools Black with Frame -Not Fingerprint

Installation:
Here are some tips during installation:
1. Please disconnect the battery flex cable from the device before installing the new screen. Failure to do will result in the screen not turning on.
2. Do not apply pressure to the corners of the LCD panel.
3. The screws are all different lengths, make sure they are reinstalled back into its original location.
4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
5. Be gentle to the flex cable connectors when removing and installing them. DO NOT over-bend or use excessive force which can tear the flex cable.

Problem Solution:
If problems occur after installation, for example: cannot turn on, no touch, no home button function, flashing, lines on screen etc.
Please make sure flex cable connectors are properly connected to the logicboard and double check all flex cables is in good condition. Then turn off and on the phone.

مرحبًا،

بحث

استبدال شاشة TFT لهاتف Samsung Galaxy S23 FE 5G S711 S711U S711W شاشة LCD تعمل باللمس مع أدوات سوداء مع إطار - وليس بصمة الإصبع

مميزات خاصة

وصف

منتجات شبيهه