/> Aperture F, the of gear can be set as follows:
F/1.0, 1.2, 1.4, 1.8, 2.0, 2.5, 2.8, 3.2, 3.6, 4.0, 4.5, 5.0, 5.6, 6.3, 6.7, 7.1, 8.0, 9.0, 9.5, 10, 11, 13, 14, 16, 18, 19, 20, 22, 25, 29, 32, 45, 64
Shutter T, the of gear can be set as follows:
30s, 15, 8, 4, 3, 2, 1.6, 1.3, 1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50,1 /60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,1 /320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/4000, 1/8000s
Sensitivity IS0, the of gear can be set as follows:
6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1600, 3200, 6400, 8000
Package size: 180 * 130 * 60mm / 7.1 * 5.1 * 2.4in
Package weight: 160g

Instructions:
1. After receiving the goods, it is recommended to fully c-harge it before using
2. Metering: continuous metering starts when it is turned on, and ss metering when turned off.
3. The operation dial on the right rear side of the hine has three operation modes, press forward, press backward, and press inward (leftward).
4. Selection of priority mode: operate the dial to go in (left) and press to modify the priority mode.
5. When the screen-arrow points to the aperture value, it indicates the aperture priority mode. Press the dial forward or backward to increase or decrease the value. Long press the dial forward or backward to quickly adjust the value.
6. The-arrow on the screen points to the shutter time, indicating the shutter priority mode, the same dial can adjust the value.
7. Long press the dial in (left) for more than 1 second to set the sensitivity. At this time, the screen-arrow points to ISO. Press again to exit the sensitivity setting. When the sensitivity is set, the hine can also measure continuously.

Packing List:
1 * Meter
1 * Power Cable