Bingfu 915MHz Helium HNT Lora Antenna 3dBi - 3ft RG58 Cable - Compatible with Nebra Bobcat 300 Cal-Chip RAK V2 Syncrobit SenseCAP M1 Helium HNT Miner Hotspot Gateway
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
【Use Cases】 - [Urban Area], [Suburban Area], [High Hotspots Density Area]. 【Higher dbi rating antenna is not always better, this Antenna outperforms 5.8dbi and 8dbi Antenna in some use cases】
【Feature】 - Gain: 3dBi; Antenna Height: 13.7inch/35cm; Direction: Omni-directional; Frequency: 860-930MHz
【Note】- Crimp in cable may causing poor performance, please do not crimp the cable.
【Application】 - Compatible with all helium miner hotspot: Nebra HNT Indoor/Outdoor Hotspot Miner, RAK V2 Hotspot Miner, BOBCAT Miner 300, SyncroBit Gateway, SenseCAP M1, Sensecap MX, Kerlink helium miner lora gateway, Helium Miner crypto, lora camera, designed for HNT Rewards Bitcoin Miner LoRa Helium mining, Low power radio: Sigfox, LPWA, LoRa, mesh networks, IoT Application 【Note: This is Lora 915MHz Antenna, does not compatible with 4g or wifi devices】
【Packing List】 - 1 x 915MHz antenna; 1 x 3ft RG58 extention cable; 1 x Adapter; 1 x U-bolt (Pole is not included)
Description
Specification:
Frequency: 860-930MHz
Gain: 5db
Antenna Length: 35cm
VSWR Polarization: Vertical Polarization
Connector interface: stud
Impedance : 50 Ohm
Installation : Pole-holding mounting
Input connector type : N-type male
Extension Cable: N Female to RP-SMA Male With 1Meter Low Loss RG58 Cable
Operating Temperature: -20°С ~ +80°С
Storage Temperature: -30°С ~ +85°С
Packing List: 1 x Fiberglass LoRa Antenna, 1 x 10ft RG58 Extention Cable(N Female to RP-SMA Male), 1 x U-bolt Clamp
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
{"email":"Please enter your email address","email_i":"Invalid email address"}
Copyright © Tilga 2026, all rights reserved.