Product Highlights
Specially optimized algorithm firmware enhances the hashrate to 960KH/s, increasing the probability of winning the lottery by 1750% (Nerdminer v2 only 55KH/s)
The display will turn off after 1 minute without operation, and you can wake up the screen by pressing any key to avoid light pollution.
We offer long-term support for our services, https://t(DOT)me/NMMiner.
By double-clicking the USER key, allows you to switch to a desktop clock mode with the BTC Lottery runs in the background.
For GitHub-Project: https://github(DOT)com/NMminer1024/NMMiner
If you want to upgrade the firmware, just use the NMFlash Web: https://flash(DOT)nmminer(DOT)com/

Main Features
ESP32-WROOM-32 Module, support Wi-Fi and BLE.
Optimized Software that achieves a higher Harshrate of 960KH/s.
Hashrate increases by 1750% more than other boards from rivals, which means 1750% more chances of winning.
Standalone: can work as a BTC lottery miner directly over WiFi.
No External computer is needed.
Embedded: low cost, low maintenance, high availability, high reliability, low power.
Versatile: solo/pool mining.
ESP32-S3R8 MCU wifi microcontroller on board.

Specifications
Master Chip: ESP32-WROOM-32
Wi-Fi: 802.11 b/g/n
Bluetooth: Bluetooth-LE: Bluetooth4.2
Hardware Resource: UART, SPI, SDIO, I2C, PWM, I2S, ADC
Memory:
384KB ROM;
512KB SRAM;
16KB RTC SRAM;
8MB SiP Flash
Interface: Type-C USB;
GPIO: 22
Antenna Gain: Board Antenna, 2dBi
Operation Temperature: -20 ~70

Parking List
1 x ESP32-2432S08 2.8 Inch Screen
1 x USB Cable
1 x Transparent acrylic shell