HHIP 1 Ton Heavy Duty Arbor Press with Multi Gage BEFORE YOU ORDER: PLEASE REVIEW ALL OF OUR PICTURES WITH THE PRODUCT SPECIFICATIONS. This will ensure you select the appropriate arbor press for your needs. Heavy duty frame. Precision made. 4 position steel anvil. Steel pinions. An arbor press is a precision tool designed for applying controlled force in a vertical direction. It consists of a lever and a ram, and it is typically used for tasks such as pressing bearings, bushings, or small components together. Caution, Excessive force: Adding a cheater bar, which is essentially a longer lever, can exceed the press's intended load capacity, leading to potential damage or failure of the press itself. The increased force may cause the press components to bend, break, or malfunction. If you require more force than your arbor press can provide, it's recommended to consider upgrading to a more robust press that suits your needs. 7-In-1 Multi-Purpose Gage is made of tool steel with black coating and laser engraved markings. This multi-purpose tool measures wire gages, drill sizes, drill points, screw pitches, bores and can also be used as a ruler or protractor. The gage has a tap & drill recommendation chart with wire gage measures 0.024-0.25"; Drill sizes include #5, #6, #8, #10, #12, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 & 3/4"; Drill points include 60, 90, 118 & 135 degeres.; Screw pitch gage measures 40th, 32nd, 24th, 20th, 18th, 16th, 14th, 13th, 12th, 11th & 10th TPI; Bore gages include 1/64-1/2". The ruler on the tool is 2-1/2 x 32nds and the protractor measures 15, 30, 45, 60, & 90 degrees.