Search

Home / uxcell / Fittings
uxcell 2Pcs Push to Connect Fittings, 1/4" Tube ODx3/8" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems in Saudi Arabia uxcell 2Pcs Push to Connect Fittings, 1/4" Tube ODx3/8" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems in Saudi Arabia uxcell 2Pcs Push to Connect Fittings, 1/4" Tube ODx3/8" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems in Saudi Arabia uxcell 2Pcs Push to Connect Fittings, 1/4" Tube ODx3/8" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems in Saudi Arabia uxcell 2Pcs Push to Connect Fittings, 1/4" Tube ODx3/8" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems in Saudi Arabia

uxcell 2Pcs Push to Connect Fittings, 1/2" Tube ODx1/2" NPT Female Thread Straight Pneumatic Connector for Hydraulic and Pneumatic Systems

SAR 64

Brand
uxcell
Category
Fittings
1 +

Special Features

  • [SIZE&PACKAGE]: Operating Pressure: 0-1.2 MPa; Operating Temperature: 0-70 Degree Celsius; Thread Size: 3/8" NPT; Fit Tube OD: 1/4"; Fitting Size: 28 x 21mm/1.1" x 0.83"(L*W); Package: 2Pcs x Push to Connect Fittings
  • [MATERIAL]: Air hose fittings are made of plastic and nickel-plated brass, and have the characteristics of flexibility, wear resistance, light weight, crack resistance, compression and corrosion resistance, good sealing performance, and long service life
  • [DESIGN]: The pneumatic straight connector has a push-fit fitting on one end and an internal thread on the other end. The fitting can be rotated freely, and the angle can be adjusted at any time. The release ring helps to easily connect the tube manually without tools
  • [INSTALLATION]: The push-in connection pipe fitting is easy to install. First, cut the pipe flat, then put the pipe into the end of the fitting to prevent leakage. After inserting the pipe, try to pull the pipe. If the pipe cannot be pulled, it means it is connected. When loosening the pipe, make sure there is no pressure in the pipe, and then press the end cap evenly to the bottom
  • [WIDE APPLICATION]: Push to Connect Fittings can be used to connect polyethylene, nylon, and PU pipes. Commonly used in low-pressure hydraulic and pneumatic systems, such as aircraft control, air horns, automotive assembly, and maintenance, etc

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}