Installation instructions 1.Wipe the surface where you want to stick. Keep dry and clean. 2.Determine the installation location and then make comparison of the product and installation location. If the product doesnt fit your vehicle, please contact us immediately 3.When tearing off the double-sided adhesive of cover trim, you cant touch the double sided paste with your hand. 4.In order to achieve better effect, if the temperature is below 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees). 5.Align position and then paste. The paste effect depends on paste conditions and correct installation. 6.Please do press hard especially on the edges at least 2 mins after installing. 7.Please dont touch water and Keep dry after been install at least 72 hours. Or it will easy to fall off.