Extended Length: 10 inch (254 mm, center to center)
Compressed Length : 6.26 inch (159 mm, center to center)
Youxmoto lift support shocks meets original specifications and perfectly fit for 6915, 8322QS, 9023ss, 10159-31, 1015931, ML99-45.
Please select the appropriate parts based on your modle to achieve the best results.
Install lift support to free up your hands. When opening the front hood/rear tailgate/rear window glass, the struts will firmly support it without the need for your head support, making it easy for you to operate.
Before Replacement:
The original installation status and all provided accessories checked to identify reusable components. When dismantling the old elevator bracket, it is necessary to properly preserve these available parts for future installation of the new bracket.
When Replacing:
When removing the old lifting bracket, always use your hands to firmly support the engine hood, rear window, or hatch during the replacement of the pillar to prevent sudden detachment and collision. Subsequently, gently pry open the iron plate on the connector with a flat head screwdriver to open the clip and remove the end. The other end is also operated using the same method. If the end of the pillar is fixed with an iron plate, simply unscrew the nut and bolt to remove the other end.
Please Note:
Do not dismantle both pillars at the same time. Follow the step-by-step sequence of "dismantling one - installing one - then dismantling the other - then installing the other".