Fitment 1 — Corolla & Camry: Compatible with Toyota Corolla 2003–2024 (CE/LE/S/SE/XSE/XRS; sedan/hatch where listed) and Toyota Camry 2002–2024 (L/LE/SE/XLE/XSE; I4 & V6). This is the 3-pin front turn-signal connector pigtail; match the plug shape and keying before purchase.
Fitment 2 — Highlander, Tacoma & Tundra: Fits Highlander 2001–2024 (incl. Hybrid where shown), Tacoma 1995–2023 (all common trims), and Tundra 2007–2021 (SR/SR5/Limited/Platinum/1794/TRD Pro; halogen or mixed headlamp families as listed). Always confirm by comparing the 3-pin footprint and latch.
Fitment 3 — Additional Toyota/Scion lines: Also used on 4Runner 2003–2009, Avalon 2000–2018, Venza 2009–2010, and Scion xB 2004–2015 where this 3-pin connector appears under Electrical → Wiring & Clamp or the headlamp/turn-signal sub-group. Check your VIN/build sheet or the original connector for final confirmation.
OE & Interchange : Connector housing 90980-11020 (also searched as 9098011020). Typical Toyota repair wires used with this connector include 82998-12800 (often ×3 in front turn-signal circuits) and, on some harness charts, 82998-12440. These are service leads for repinning if needed.
Complementary / mates with (not interchange): Commonly plugs into the front turn-signal socket 90075-60060 inside the headlamp/combination lamp. The opposite/mating side frequently referenced for this plug family is 90980-11607. Typical bulb used in these assemblies includes 90981-13058 (verify per model year).
Primary assemblies / where used: This pigtail serves the front turn-signal circuit inside the headlamp or combination-lamp assembly on the models above. You'll find it under Electrical → Wiring & Clamp and headlamp sub-groups in catalogs. For exact lamp or harness PNs, confirm by VIN to avoid trim/year mismatches.
Buyer guidance : Before ordering, compare: 3-pin layout, indexing key, latch orientation, and shell color/lock. If your vehicle uses LED headlamps with a different turn-signal architecture, this pigtail may not apply.